How to Connect BLC Camera Port to PC

• There are two options (camera port) offered in the Interface Board: USB and Ethernet. The most important point is the consistency between inside and outside. The IP of the camera port is 192.168.8.200.

• Configure the Ethernet on the PC to be in the same network segment.

• Ping 192.168.8.200 in cmd to verify whether it is OK

• Related Articles

• How to solve the problem when the firmware of the camera does not match the version of software?

  If unsure whether the BLC version matches the camera firmware version, it is recommended to upgrade both to the latest versions. Common issues caused by device mismatches include: 1. Black screen during image capture. 2. Image capture offset in ...

• How to check the version of BLC software？

  Step 1: Open the BLC Step 2: Click the BLC logo in the upper left corner

• Turn Off the Firewall or Add BLC to the Whitelist

  • Turn off the firewall • Add BLC to the whitelist (set inbound and outbound rules) 1) inbound: 2) outbound:

• Resource download

  BLC Software Catelog Operation manual BLC Software Content Operate BLC Software Download Firmware Download Catelog Title Operate SATO: BLC Catelog v4.5 Download Zebra: BLC Catelog v4.5 Download Operation manual Title Operate BLC Barcode Line Camera ...

• Introducing the Third-Generation BLC Label Printing Quality Inspection System