1.Optimize calibration for BLC camera
V3.3.27(2026.03.25)
1.Fix: The grade cannot be tested when selecting GS128 of Barcode(PRO)
2.Optimize the image capture configuration of BLC B-series camera
V3.3.25(2026.03.20)
1.Fix: The grade cannot be tested when selecting GS128 of Barcode(PRO)
V3.3.23(2026.03.19)
1.Add 1D Barcode big blemish inspection algorithm V6
V3.3.22(2026.03.18)
1.Add support for BLC B406/B606 For Single Label Inspection
V3.3.21(2026.03.07)
1.Optimize the label analysis: support layer analysis
2.Optimize the barcode grade measurement of Barcode(PRO)
3.Result API added param fmt, can select result fields
V3.3.20(2026.03.04)
1.Func API added method: GET_GLOBAL_STATISTICS
V3.3.19(2026.03.04)
1.Optimize the 2D grade measurement of Barcode(PRO)
2.Barcode, OCR, Pattern Match add output: Remark
3.Fix: Deletion the number failed in the VPF numbering feature
4.Optimize 1D Barcode blemish inspection algorithm V5
V3.3.18(2026.02.28)
1.Calibration and Capture A Frame will be output and displayed separately in BLC camera
V3.3.17(2026.02.27)
1.Optimize 1D Barcode blemish inspection algorithm V5
V3.3.15(2026.02.25)
1.Add V5 Barcode AI blemish inspection algorithm
2.BLC cameras will all use encoders (currently enabled models: CL4NX, ZT610, T6000, ZT510, ZT411, TSC MX, C8030)
V3.3.13(2026.02.13)
1.Pattern Match add an option: Inspection timeout
V3.3.12(2026.02.11)
1.Optimize the Calibration and Capture A Frame when the media sensor is disabled
2.Optimize Zebra destruction, add an option: Destruction length
V3.3.11(2026.02.10)
1.Optimize the grade measurement of Barcode(PRO)
V3.3.10(2026.02.09)
1.Adjust the encoder for the EPSON printer
V3.3.9(2026.02.06)
1.Add API interface: Func
2.Circular references will be detected during connectivity testing
V3.3.8(2026.02.04)
1.Optimize the destruction and reprinting for SATO printers
V3.3.7(2026.02.02)
1.Add Barcode AI blemish inspection algorithm
V3.3.6(2026.01.31)
1.Add option (GS): Destruction feed
V3.3.5(2026.01.30)
1.Optimize BLC camera (add options related to white light, image, and calibration)
2.The input work order can be canceled
3.Optimize the data interception
V3.3.3(2026.01.26)
1.Optimize the Remove Noise of the BLC camera
2.Optimize Barcode(PRO)
V3.3.2(2026.01.21)
1.Optimize the detection of variable number of barcodes for Barcode(PRO)
V3.3.1(2026.01.19)
1.Add supported printer: EPSON CW-C8030
2.Barcode(PRO) added option: Barcode Region Zoom
V3.3.0(2026.01.14)
1.Adjust the execution timing of NG/OK operation to before saving the image
V3.2.99(2026.01.12)
1.Layer names support multiple languages
2.Fix: The layer list is not reset when creating new VPF
V3.2.98(2026.01.07)
1.Update the temporary authorization for Barcode(ENT)
V3.2.96(2026.01.04)
1.Add OCR detection engine to OCR: OCRENv3(ENT), OCRCHv3(ENT)
V3.2.95(2025.12.31)
1.Optimize the destruction and reprinting for Zebra printers
2.Optimize the inspection of variable number of barcodes for Barcode(PRO)
V3.2.93(2025.12.30)
1.Deleting the correction reference input (or corresponding module) will also disable the reference correction
2.Optimize the Barcode(PRO)
V3.2.92(2025.12.28)
1.Optimize the recognition of variable number of barcodes in Barcode(PRO)
V3.2.91(2025.12.25)
1.Optimize printer connection
2.Optimize the single label inspection, destruction and reprinting under the cutter mode for Zebra printers
V3.2.90(2025.12.23)
1.Add single label inspection feature for SATO printers
V3.2.89(2025.12.22)
1.Fix: Barcode(PRO) may repeatedly recognize the same barcode when recognizing variable quantity barcodes
V3.2.87(2025.12.19)
1.Optimize the recognition of variable number of barcodes for Barcode(PRO)
2.Delete OCR summary Refer
V3.2.86(2025.12.18)
1.Optimize and expand the control interface of the API
V3.2.85(2025.12.17)
1.Add v4 algorithm for 2D Barcode blemish inspection(specifically for cross data matrix code)
V3.2.83(2025.12.16)
1.Optimize the speed when the Barcode(PRO) recognizes a variable number of barcodes
V3.2.81(2025.12.13)
1.When recognizing barcodes based on variable quantities, the readability verification of labels without barcodes will no longer result in NG.
V3.2.80(2025.12.12)
1. Add support for labels with variable barcode quantities in the Barcode module (when barcode quantity is set to 0)
2. Duplicate Data Check will only list the time of the most recent duplicate data
V3.2.79(2025.12.08)
1.Optimize connectivity testing in delayed cutter mode (Zebra printer)
2.Fix: The 2D Barcode blemish inspection algorithm V3 may fail after multiple start/stop inspection
V3.2.78(2025.12.05)
1.Fix: When using the work order as a verification requirement, the corresponding inspection results may be lost
2.Add the inspection for DataMatrix in the 2D Barcode blemish inspection algorithm V3
V3.2.76(2025.12.03)
1.Add VPF numbering feature
V3.2.75(2025.12.02)
1.Grant license to no longer attempt to use encryption dongles
2.When multiple algorithms are selected for 2D barcode blemish inspection, the higher version will no longer overwrite the lower one; both versions will perform inspection