When the printing speed is set in the printing software, the setting does not take effect on the printer.

• Related Articles

• How to deal with when the printer pauses after printing one or several labels?

  This issue is often caused by the data transmission speed not keeping up with the printing speed. If the printer is connected via an Ethernet cable, ensure the network connection is stable. You can check for packet loss and latency by pinging the ...

• How to handle the incomplete printing of the content on the right side of the label?

  The incomplete printing of the content on the right side of the label may be caused by the label width setting on the printer panel being too small. May manually change the parameter to check the printing effect. Menu→Print Quality→Label Width (Dots)

• After the printer pauses and restarts, the printing position is severely offset during the printing process

  The printer initially prints labels in the correct position, but after pressing the pause button, the motor retreats. If printing is resumed at this point, the printing position will shift downward. Upon observation, this issue is caused by severe ...

• Handling the ribbon wrinkle during printing.

  1. Check the ribbon quality: Ensure the ribbon is of good quality. Low-quality ribbons have a thin base that can easily wrinkle. Using a high-quality ribbon is recommended to ensure smooth printing. 2. Calibrate the printer If the prompt shows ...

• BLC Inspection Kit Now Available for Zebra ZT411 RFID Printer! 🎉

  We’re proud to introduce the BLC Inspection Kit, specially developed for the Zebra ZT411 RFID printer — a cutting-edge tool designed to ensure quality and accuracy when printing wet inlay (flexible) RFID labels. In this demonstration video, you’ll ...