After the printer pauses and restarts, the printing position is severely offset during the printing process
The printer initially prints labels in the correct position, but after pressing the pause button, the motor retreats. If printing is resumed at this point, the printing position will shift downward.
Upon observation, this issue is caused by severe and uneven wear on both sides of the platen roller.
Related Articles
How to deal with when the printer pauses after printing one or several labels?
This issue is often caused by the data transmission speed not keeping up with the printing speed. If the printer is connected via an Ethernet cable, ensure the network connection is stable. You can check for packet loss and latency by pinging the ...BLC V3 Label Inspection with Zebra ZT610 Printer | Next-Gen Quality Control
Discover our latest generation of BLC camera brackets, specifically designed for the Zebra ZT610. In this demo, we walk you through the entire process — from creating a label inspection template with the BLC wizard, to real-time quality control ...When the printing speed is set in the printing software, the setting does not take effect on the printer.
When the BLC software is in operation, the printer’s printing speed will be fixed at the speed used during the inspection template take connectivity test. Once fixed, the printer will no longer accept printing speed adjustment commands from other ...BLC Inspection Kit Now Available for Zebra ZT411 RFID Printer! 🎉
We’re proud to introduce the BLC Inspection Kit, specially developed for the Zebra ZT411 RFID printer — a cutting-edge tool designed to ensure quality and accuracy when printing wet inlay (flexible) RFID labels. In this demonstration video, you’ll ...Handling the ribbon wrinkle during printing.
1. Check the ribbon quality: Ensure the ribbon is of good quality. Low-quality ribbons have a thin base that can easily wrinkle. Using a high-quality ribbon is recommended to ensure smooth printing. 2. Calibrate the printer If the prompt shows ...